Ensure you have boiling water everyday!
Boiling hot water services are not typically found in domestic use situations but more in a commercial or industrial establishment. The reason for this is that firstly these types of systems require a large amount of electricity to power them and secondly they are both expensive to purchase and run.
A boiling water system can replenish itself instantly with almost instant boiling hot water, the uses for this water vary but commonly its used for cleaning purposes in places such as commercial kitchens. The most common location for these units to be installed is just above bench level inside of the desired room which is likely to receive the most use most use over a sink in case of any spills and to enable to sink to be filled up with the water and then used for its desired purpose.
Although the reservoir for majority of these systems is quite small ranging from 5 to 10 litres the replenishment time frame is almost instant. The use for boiling water can also be delivered through a hydro tap for the purpose of making tea and coffee, in this configuration the water boiling unit is located below the kitchen sink and the hydro tap is installed above so that any excess water can discharge over the sink.
In Australia there are 6 main manufacturers/distributors of these boiling water units in the plumbing industry and they are ZIP, Stiebel Eltron, Birko, Wilson, Rheem and Billi. Like most hot water systems, they are all very similar and each have their own points of difference. For example, with the ZIP brand you can accompany boiling water with chilled water and even add carbonated water. Rheem offer the Lazer range of wall mounted boiling water units which can deliver up to 40 litres in their commercial range.
As these particular types of hot water systems are not your run of the mill configuration and many of them are controlled with extremely expensive and sensitive computers you will find not too many plumbing companies in Adelaide who are willing to fault find and service these units, fortunately our technicians are trained and our purchasing officers in our head office have access to the various distributors throughout the globe enabling us to get the part for your boiling hot water service promptly getting your business back in operation with minimal amounts of down time.
Follow Us!