Probably one of the more common questions we get asked, how can I stop my hot water service
from leaking?

Type Of Water Heater

The first thing we ask our customer is what type of water heater do you own? Is it a storage tank or a small box which hangs on the wall? The likelihood of being able to fix a continuous flow hot water (small box on the wall) are greater then that of a storage tank.

Regardless there is typically always a shut off valve which will temporarily stop the flow of water until a service technician can attend.

If a customer reports that a storage style water heater is leaking it is usually an older model potentially 10 plus years old and the cylinder has most likely developed corrosion internally and now started to leak.

Don’t Let The Problem Get Worse

Sometimes these leaks start off as a very minor issue and can escalate over time. Unfortunately for this type of problem there is no fix and the storage tank will need to be replaced. If how ever the tank or heat exchanger itself is not leaking there could well be an associated part
which is leaking. Items such as high temperature and cold-water relief valves can fail during the life of a hot water service and start to leak.

These are quite easy to fix and are not going to cost you a second mortgage.

If you feel you may have a hot water emergency, please get in contact with us. Our service vans are
stocked with all the common parts to help you get your problem back under control. We also carry

It was approximately 8 years ago that the government introduced incentives to have a Heat Pump hot water service installed to homes and businesses.  It is now that majority of these systems are coming out of there warranty periods and the tanks are starting burst open.  This is leaving the home owners and business owners in a position where they now need to consider their options for another 8 years, replace with another heat pump or swap back to dedicated electric water heaters on J tariff.

Heat Pumps

Well in most cases the choice is very clear, revert to the electric storage water heaters and ensure they are wired up on off peak electrical.  The reason for this is that the heat pump water systems are extremely expensive to purchase without the huge government rebates any more.  Unfortunately, many customers didn’t have a good experience with the overall heat pump operations, many complaining about excessive noise and un reliable refrigeration components located either on top or at the front bottom.

What is the advantage to changing back to a conventional 250L electric hot water service?  The tanks now come with an optional 10-year warranty, you only need a licensed plumber to service these during the heaters life (not a refrigeration mechanic and plumber), they are silent in operation and can be installed in discrete locations with zero ventilation such as laundry cabinets and under kitchen benches (sizes may vary).

Manufacturers

The range of manufacturers who produce these systems for the Adelaide Plumbing market is also far wider than previously experienced.  Manufacturers such as Aqua MAX, Rinnai, Rheem, Vulcan, DUX Stiebel Eltron and Thermann all provide systems in various sizes with options on warranty periods, the choices are set up to suit most budgets.

Probably the biggest bonus of all is that we carry these in stock at our warehouse giving you the ability to get a same day change over performed of your water heater across Adelaide.  Ask about our options to pay for your hot water system on your credit card today!

A hot water service which is not working correctly can contribute significantly to any home or businesses energy bills.  It doesn’t matter what source of energy is being used whether it be electricity, gas or solar (sun) via panels on a roof.  If components have not been installed correctly or over time have started to fail then the system itself can start to operate inadequately and could be using huge amounts of energy leading to very nasty surprises when your next Origin or AGL retailers bill arrives in post.

For example, we recently attended a client’s home in Adelaide where they were questioning their excessive electricity bills.  They are living in a 2 bedroom and 1 bathroom home in the heart of the city off Hutt Street.  The hot water service being approximately 7 years of age and was a 125 litre DUX model.  The latest electricity bill was $612 for the quarter just gone.  The customer lives at the home by herself and is very mindful of electricity usage as the costs of energy consumption keep sky rocketing in South Australia.  As you will see in the image on this page that the electrical components and the thermostat all appear to be in bad condition.  When we performed some test on these parts with a multi meter it showed that the thermostat itself was not turning off, so the water heater was constantly heating 24/7.  By doing this it had put excessive strain on the wiring also which could have resulted in other potential problems such as an electrical fire one day.

To have this problem rectified we firstly replaced the wiring from the switch board to the water heater.  This hot water service is controlled via 20-amp circuit breaker dedicated to feeding the power to the this DUX unit only.  We then changed over the Robert Shaw thermostat and checked that it was turning on and off (brand new).  Because this water heater is only 125 litres it is not on J tariff electricity (off peak) it runs off M tariff (peak electricity) so we were able to leave the hot water service under load ensuring the customer will continue to get hot water.

If you suspect that your gas or electricity bills are too high it is important to have it checked out by a hot water specialist today before winter hits and your boiler starts to come under extreme pressures due to the changes in temperature.

As Adelaide’s largest supplier and installer of hot water services in South Australia we get asked a lot of questions about making the right choice of water heater.
Probably the most common question asked is “how much will it cost to install the biggest instant hot water service
they make?”

That answer is straight forward as we have rates for standard change overs and upgrades, BUT what people are not accurately educated on are a few important
factors.

• Do you have a large enough gas pipe at the location of the new hot water service?  The larger the unit the thirstier it will be for gas and in the colder months of the year is when the demand will be the highest, so although it may seem to cope during summer when winter comes you will see the performance drop off significantly.  Your warranty will not cover faults relating to inadequate gas supply and these issues can be very expensive and not to mention dangerous.
• Are the incoming and outgoing water pipes large enough to firstly supply the new hot water service say 27 litres per minute of
  cold water and then are the pipes inside of the home large enough to disperse 27 litres per minute of hot water once produced?  In many cases this answer is no when upgrading on an existing home.

With these two vital points in mind you could be paying for a system that will never really work to its full capacity.  Many plumbing companies will sell you the largest Bosch, Rheem or Rinnai continuous flow hot water service you can buy, but there are very few who will take the time to educate the customer on the correct unit for your home or business.  Don’t waste money on a big water heater for your home that you’re never going to see the real benefits of, speak with a hydraulic consultant today.